Mobile Intel Pentium 4 - M 2.20 GHz, 512K Cache, 400 MHz FSB

Lithography refers to the semiconductor technology used to produce an integrated circuit and is expressed in nanometers (nm), which indicates the size of the features built on the semiconductor.

Cores are a hardware term that describes the number of independent central processing units in a single computing component (die or chip).

The processor’s base frequency describes the speed at which the processor’s transistors turn on and off. The base frequency of the processor is the operating point at which the TDP is determined. Frequency is usually measured in gigahertz (GHz) or billions of cycles per second.

The processor cache is an area of fast memory located on the processor. Intel® Smart Cache refers to an architecture that allows all cores to dynamically share access to the last level cache.

A bus is a subsystem that transfers data between computer components or between computers. Types include front-end bus (FSB), which transfers data between the CPU and the memory controller hub; direct media interface (DMI), which is a point-to-point connection between the Intel integrated memory controller and the Intel I/O controller hub on the computer motherboard; and Quick Path Interconnect (QPI), which is a point-to-point connection between the CPU and the on-chip memory controller.

FSB parity provides error checking for data sent to the FSB (front side bus).

Thermal design power (TDP) is the average power in watts that the processor dissipates when running at base frequency with all cores active under an Intel-defined demanding workload. See data sheet for thermal solution requirements.

The VID voltage range is a measure of the minimum and maximum voltage values at which the processor is designed to operate. The processor passes the VID to the VRM (Voltage Regulator Module), which in turn supplies the correct voltage to the processor.

Date of first introduction of the product.

Intel Service provides functional and security updates for Intel processors and platforms, typically through the use of an Intel Platform Update (IPU). For more maintenance information, see «Changes to Customer Support and Service Updates for Select Intel Processors®».

«Built-in options available» means that the SKU is generally available for purchase for 7 years from the launch of the first SKU in a product family and may be available for purchase for a longer period of time under certain circumstances. Intel does not guarantee or warrant product availability or technical support through course recommendations. Intel reserves the right to change development plans or discontinue products, software, and software support services through standard EOL/PDN processes. Product certification and conditions of use information can be found in the Product Release Qualification (PRQ) report for this SKU. For details, contact your Intel representative.

A socket is a component that provides the mechanical and electrical connection between the processor and the motherboard.

Junction temperature is the maximum temperature allowed on the processor die.

Intel Technology® Turbo Boost dynamically increases processor frequency as needed, taking advantage of thermal and power headroom to deliver speed boosts when you need them and improved energy efficiency when you don’t.

Intel Technology® Hyper-Threading (Intel® HT Technology) provides two processing threads per physical core. Applications with more threads can do more work in parallel, completing tasks faster.

Intel Technology® Virtualization (VT-x) allows one hardware platform to function as several «virtual» platforms. It provides improved manageability by limiting downtime and maintaining performance by isolating computing activity into separate partitions.

Intel architecture® provides 64-bit computing on servers, workstations, desktop and mobile platforms when combined with supporting software.¹ Intel 64 architecture improves performance by allowing systems to address more than 4 GB of both virtual and physical memory.

The instruction set refers to the basic set of commands and instructions that the microprocessor understands and can execute. The value shown indicates which Intel instruction set the processor is compatible with.

Idle states (C-states) are used to save power when the processor is idle. C0 is the operating state, meaning the CPU is doing useful work. C1 is the first wait state, C2 is the second, etc., where more energy saving actions are taken for numerically higher C states.

Advanced Intel SpeedStep Technology® — is an industry-leading solution to deliver high performance while meeting the energy-saving needs of mobile systems. Traditional Intel SpeedStep Technology® switches voltage and frequency simultaneously between high and low levels depending on the processor load. Advanced Intel SpeedStep Technology® builds on this architecture using design strategies such as separation between voltage and frequency changes, and clock separation and recovery.

Intel® Demand Based Switching is a power management technology that maintains the microprocessor’s supply voltage and clock speed at the minimum required level until additional processing power is required. This technology was introduced to the server market as Intel SpeedStep Technology®.

Intel Technology® Trusted Execution for Secure Computing is a universal set of hardware extensions to Intel processors and chipsets®, which enhance the digital office platform with security features such as controlled launch and secure execution. This creates an environment where applications can run in their own space, protected from all other software on the system.

Execute Disable Bit is a hardware-based security feature that can reduce exposure to viruses and malware attacks, and prevent malicious software from executing and spreading on a server or network.